In response to current changes in the CNC Router market, Omnitech Systems has developed a new machine to meet not only the stringent demands of today woodworking shop, but also price it at point where customers will feel comfortable investing. The result of this development is the SELEXX/BDT. The Selexx/BDT was designed to incorporate all the practical and useful features found on all Omnitech machines, as well as our industry renowned reliability, but at a price point under $60,000. The Selexx/BDT will include the following features:

• Standard 5 x 10 table size.
  
• Rigid steel and iron construction on the base and gantry.
  
• Rack and Pinion on both the x and y axis.
  
• High quality Ball Screw on the z axis.
  
• Phenolic table top with grid matrix for optimal vacuum hold down.
  
• 10hp Becker vacuum pump
  
• Syntec PC based controller with graphic interface, independent control cabinet and handheld remote.
  
• 3 material reference pins located at 0,0 for easy material positioning.
  
• Automatic tool length measuring and calibration device.
  
• Safety hood around both working heads.
  
• 2000 inches per minute travel in x and y axis.
  
• 400 inches per minute travel in the z axis.
  
• 8 inch z axis clearance.
  
• 7.5 hp ANDI SK 30 Spindle with 1000-18000 rpm capacity. (dust extraction manifold and air nozzle included)
  
• 8 position static tool changer located at the back of the table.
  
• 6 position vertical drill with 32 mm spacing and independent programmability.
  
• 1 year parts and labor warranty, machine and controller.
  
• Free Phone support for the lifetime of the machine and installation and training.

All these features plus one of the most trusted names in CNC is available for $59,500.00, installed and trained with warranty and support.