|
 |
Configuration |
| Design: |
Compact footprint – no separate electrical cabinet |
| Construction: |
Heavy duty cast iron gantry & table bed – no vibration |
| Drive System: |
X & Z axis = precision ground ballscrew
Y axis = Dual rack & pinion system on the long axis |
| Maximum Speed: |
80 Meters/Minute (3200 inches.minute) |
| Controller: |
- FANUC open architecture industrial controller with PC front-end, network ready!!
- Unlimited number and size of programs!
- Connectivity: USB, Floppy, CD with remote DNC capability
- On-board PLC & status diagnostic system for easy troubleshooting
|
| Primary Router Spindle: |
One maintenance free 10 HP HSK-63F system, cartridge replacement type air-cooled, ceramic ball bearings with variable speeds from 1000 – 24.000 RPM
|
| Automatic Tool Changer: |
- One 8 position carousel type, ride along with the router spindle
- Eight HSK-63F tool holders complete with collet nuts
- Sixteen various common sized collets
- One tool changing station with wrench set
|
| Automatic Tool Calibration: |
One automatic tool length calibration and registration system |
| Secondary Line Boring Spindle: |
One 9 vertical drill spindles for 32mm line boring, cartridge replacement type
|
| Dust Extraction System: |
- Two independent ports – one per working spindle
- Each port automatically opens and closes for maximum efficiency
|
| Safety Hood: |
- Large, see through heavy duty safety hood surrounding both working spindles
- Prevents potential injuries from possible kick-outs of small debrie
|
| Vacuum Pump: |
- SELEXX/MATE and SELEXX/PAL are equipped with each one 10HP BECKER rotary vane “low maintenance” Vacuum Pump, drawing 24” Hg.
The MATE and PAL are pre-wired and pre-plumbed for the future addition of second pumps.
- Models SModels SELEXX/CHIEF and SELEXX/PRIMO are equipped with 2 (two) 10HP BECKER rotary vane “low maintenance” Vacuum Pumps as standard
|
| Tabletop Reference Pins |
Six automatic steel pop-up pins within 2 separate zones, complete with built-in safety sensors for manual and automatic operations |
| Safety Light Barrier: |
One set equipped on loading side of machine – additional safety barriers for all four sides available as option. |
| Power Transformer: |
Built-in power transformer for controlled voltage |
| Warranty and Support: |
- Two year warranty on parts – one year on labor on all SELEXX/Models
- Two year warranty on parts and labor on the FANUC controller
- FREE technical phone support for lifetime of machine
|
| Quality Assurance: |
The SELEXX CNC Router series fully 9001:9002 CERTIFIED |
|
Link Quicktime VR
Download Brochure
Get more CNC Router for less money
|
PRIMO 5' x 20'
